Lak Alkyd Satin

€32,95

Solvent-borne alkyd finishing lacquer with a satin aspect as well as a perfect smoothness and flow, resistant to wear and tear, dirt and skin sebum. Guarantees an excellent adhesion on previous coats of lacquer.

Ideal for all types of substrates subject to regular luminosity and intensive use.

Can size

Tint

Selected colour

Download technical datasheet.

Download safety datasheet.

Technical properties

Area of use

Indoors & outdoors

Aspect

Satin

Spreading rate

12 to 15 m²/l

Touch dry

6 hours

Recoatable

18 hours

Equipment cleaning

White spirit

Area of use

Previously painted indoor and outdoor substrates made of: wood and derivatives, metal, hard PVC...

Do not apply on horizontal surfaces that are in constant contact with water, nor on stairs, parquet and hardwood floors.

Main characteristics

High covering effect.
Permeable to water vapour.
Long open time.
Good core hardening.
Isolates most water-soluble stains after carefully cleaning the substrate.
Excellent adhesion on previous coats of lacquer.
Perfect finish thanks to its excellent smoothness and flow.
Optimal resistance to wear and tear, dirt and skin sebum.
Easy upkeep: washable.

Method of dilution

Ready-to-use.

On slightly absorbent substrates, dilute the first coat with 5 to 10% white spirit.

Do not dilute the product if you want to isolate a water-soluble stain.

Available shades

With the 3 bases (W, M and TR), obtain a range of over 30,000 shades.

Please be aware that the darker the shade, the weaker the resistance to abrasion and to UV rays.

Our LAK ALKYD SATIN contains an alkyd resin which, indoors, ages differently than an acrylic resin. Tip: dye the product in a colour different to the one on the walls covered in acrylic paint.

Precautions for use

Our LAK ALKYD SATIN contains an alkyd resin that inside, in white or in light tones will eventually turn yellow when exposed to too little direct sunlight or to heat (radiators, heating hose, …).

Our LAK ALKYD SATIN cannot be applied on bare substrates made of zinc (galvanised steel and copper contain zinc). Make sure that the primer or previous coat of paint/lacquer is applied over the whole surface of the substrate to stop the fatty acids in the resin from reacting with these bare materials. This would result in zinc soaps which will unstick the lacquer over time.

Please be aware that the satin aspect will only show once the lacquer has dried through (after 28 days). During this period of complete drying, the lacquer’s film will appear shinier.