Area of use
Wood Rock 55 is designed for intensive residential and commercial environments.
Recommended applications
- Living room and dining room
- Bedroom
- Kitchen
- Entrance hall and hallway
- Office
- Shop and retail space
- Restaurant
- Hotel lobby
- Waiting room
Suitable substrates
Wood Rock 55 can be installed over:
- Concrete with a moisture barrier
- Wooden subfloors
- Ceramic tiles
- Existing PVC, lino, laminate or parquet flooring, provided they are in good condition and firmly bonded to the subfloor
Not recommended: not suitable for rooms exposed to significant temperature fluctuations, such as saunas or conservatories.
Main characteristics
- Water-resistant Rigid Core SPC flooring with a double protective layer.
- Quick and easy glue-free floating installation with a click system.
- Highly resistant to scratches, impacts, stains, wear and UV radiation.
- Effectively reduces footstep noise thanks to the integrated acoustic underlay.
- Slip-resistant, extra-matt surface with a realistic wood texture.
- High level of walking comfort and a pleasant feel underfoot.
- Easy to maintain thanks to its stain-resistant technology.
- Suitable for intensive residential and commercial use.
- Suitable for hydronic underfloor heating systems embedded in a cement screed. Not suitable for electric heating films.
Directions for use
Installation
- Glue-free floating installation with a click-lock system.
- Install over a clean, dry, level, stable and sufficiently strong subfloor.
- Leave a 6.5 mm expansion gap around the walls and all fixed objects.
- Before installation, leave the unopened packs lying flat for 48 hours in the room where the flooring will be installed, at a constant temperature between 18°C and 29°C.
- Keep the room temperature between 20°C and 25°C before and during installation.
- Suitable for hydronic underfloor heating systems embedded in a cement screed. Not suitable for electric heating films.
- In wet rooms, install a suitable waterproof membrane beneath the flooring to protect the subfloor against water entering through the joints.
- Not suitable for walk-in showers or other areas with a drain built directly into the floor.
Maintenance
- Sweep or vacuum the floor regularly.
- Clean up spills immediately.
- Use a slightly damp mop and a suitable non-abrasive detergent diluted in water.
- Do not use bleach, wax, oil or abrasive products.
- Do not drag heavy or sharp objects across the floor.
- Use felt pads underneath furniture and place a doormat without a rubber backing at each entrance.
Tip
When calculating the number of planks required, add an extra 10% to allow for cutting waste.