Water-borne two-pack epoxy paint with a satin aspect, extra resistant to abrasion, sporadic contact with vegetable and mineral oils, alkaline solutions and diluted acids.
Ideal for all types of substrates subject to mechanical or chemical stress above normal levels (garages, industrial floors…).
Indoor substrates previously coated in a two-pack paint, primer sealer or varnish:
Floors made of: concrete, cement coating and derivatives.
Wall surfaces made of: brick, concrete, cement coating, wall tiles, ceramic…
Can be applied as a primary and finishing coat on ceramic and wall tiles that are prepared and unpainted.
Is not suitable for tiled floors or for previous coats of one-pack products.
Our EPOXY AQUA can be applied in areas where food products are used, processed, and handled, in accordance with the Corrigendum to Council Regulation (EC) No 852/2004 of the European Parliament and of the Council on the hygiene of foodstuffs.
Our EPOXY AQUA is not lactic acid-resistant. Avoid using it in dairy plants, cheese plants, ...
Main characteristics
Water-thinnable, odourless and non-flammable.
Isolates most water-soluble stains after carefully cleaning the substrate.
Excellent adhesion on previous coats of two-pack paint, primer sealer and varnish.
Ease of application.
Resistant to washing, abrasion, sporadic contact with vegetable and mineral oils, alkaline solutions and diluted acids.
Method of dilution
Ready-to-use.
On slightly absorbent substrates, dilute the first coat with approximately 5 to 10% water. Do not dilute the product if you want to isolate a water-soluble stain.
Available shades
With the 3 bases (W, M and TR), obtain a range of over 30,000 shades.
Our EPOXY AQUA contains an epoxy resin that ages differently and does not have the same whiteness as an acrylic resin. Tip: dye the product in a colour different to the one on the walls covered in acrylic paint. Please be aware that the darker the shade, the weaker the chemical and mechanical resistance!
Precautions for use
Our EPOXY AQUA contains an epoxy resin that, in white or light tones, will eventually turn yellow over time.
Mixture preparation
This product is a combination of two components. Once combined, stir them mechanically using a round blade mixer mounted on a slow-speed drilling machine. The mixture remains usable for approximately 1.5 hrs at 23 °C. After this time period, the chemical and mechanical properties deteriorate, even if the product has not thickened in the container.
Please note that poor mixing stops the product from drying evenly!
