Finisher 300
Ready-to-use white acrylic finishing sealant made as a paste for indoor walls and ceilings. Free from solvents and plasticisers, easy to apply and to sand. Very thin sealant with excellent finishing quality. Applicable up to 3 mm per coat using a roller, an airless spray gun and a trowel. Its lighter formula provides it with a superior spreading rate compared with classic sealants.
Ideal for smoothing irregular substrates such as indoor walls and ceilings.
Can size: 12 kg.
| Can size: 12 kg |
Areas of use
IN
Spreading Rate
1,4 kg/m²/mm thick
Drying time
Touch dry
4 to 7 hrs/mm thick
drying time
Recoatable
8 hrs/mm thick
CLEANING OF
EQUIPMENT
WATER
Technical information
Indoor ceilings and wall surfaces made of plaster, plasterboard, concrete, brick, cement, roughcast, chipboard, painted fibreglass… and on previous coats of adhering acrylic paint.
Not suitable for substrates previously covered in wallpaper and/or for raw or previously painted fibreglass, solvent-based or shiny paint, raw wood, metal, glass or plastic.
For any other type of substrate, contact us and/or carry out a test beforehand.
- Very thin.
- Free from solvents and plasticisers.
- Superior spreading rate compared with classic sealants thanks to its lighter formula.
- Easy to apply and to sand.
- Excellent finishing quality.
Stir the sealant vigorously. Apply it with up to 3 mm thickness per coat with a trowel, putty knife, airless spray gun or roller (15 to 18 mm bristles), then smoothen it. Once completely dry, sand it using a mild abrasive (grit from 180).
Sand and cover the sealant only after drying is complete.
Ready-to-use. Do not dilute.
