Primer Extreme
Solvent-borne primer based on acrylic resins and with a high content of rust inhibiting pigments that guarantees outstanding adhesion on various substrates and dries quickly.
Ideal for all types of bare non-ferrous metals and bare substrates with poor adhesion.
| Base: W |
| Tint: Undyed |
Areas of use
IN/out
Aspect
semi-MAtT
Spreading Rate
10 to 12 m²/l
Drying time
Touch dry
1 hour
DRYING TIME
RECOATABLE
5 to 24 hours
CLEANING
OF EQUIPMENT
white spirit
Technical information
Bare outdoor and indoor substrates made of: aluminium, galvanised steel, copper, lead, zinc, brass, hard PVC, wall tiles and laminate.
Our PRIMER EXTREME is too aggressive for polystyrene, polyethylene and polypropylene, as well as for previous coats of one-pack paint/lacquer. Apply our POLYPRIMER on these materials.
This product is not suitable for ferrous metals. Please check our METALGONE technical datasheet for more information.
Given the diversity of compatible materials, carry
out an adhesion test beforehand.
- High covering effect.
- High content in anti-corrosion pigments.
- Outstanding adhesion on a variety of substrates.
- Long-lasting flexibility of the film.
- Fast drying.
- Indoors: can be covered with a water-borne or solvent-borne paint/lacquer.
- Outdoors: can be covered with a water-borne paint/
lacquer.
This product is available in white.
Adding dyes impairs the primer’s adhesion.
Ready-to-use.
